Cena s DPH / bez DPH
Hlavní stránka>BS EN 15550:2017 Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion
Sponsored link
sklademVydáno: 2017-08-23
BS EN 15550:2017 Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion

BS EN 15550:2017

Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion

Formát
Dostupnost
Cena a měna
Anglicky Zabezpečené PDF
K okamžitému stažení
4800 Kč
Čtěte normu po dobu 1 hodiny. Více informací v kategorii E-READING
Čtení normy
na 1 hodinu
480.00 Kč
Čtěte normu po dobu 24 hodin. Více informací v kategorii E-READING
Čtení normy
na 24 hodin
1440.00 Kč
Anglicky Tisk
Skladem
4800 Kč
Označení normy:BS EN 15550:2017
Počet stran:22
Vydáno:2017-08-23
ISBN:978 0 580 94542 7
Status:Standard
Popis

BS EN 15550:2017


This standard BS EN 15550:2017 Animal feeding stuffs: Methods of sampling and analysis. Determination of cadmium and lead by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion is classified in these ICS categories:
  • 65.120 Animal feeding stuffs
This European Standard specifies a method for the determination of the elements cadmium and lead in animal feeding stuffs by graphite furnace atomic absorption spectrometry (GF-AAS) after pressure digestion. The method was successfully tested in the range of 0,015 to 5,65 mg/kg for Cd and 0,18 to 40,3 mg/kg for lead in 11 animal feeds: 2 complete feeds (pig feed, sheep feed), 2 complementary feeds (2 mineral feeds), 1 mineral premixture, 4 feed materials (MgO, 2 phosphates, CaCO3) and 2 feed additives (CuSO4, bentonite). For the determination of extractable lead in minerals and feeds, containing phyllosilicates (e.g. kaolinite clay) wet digestion with nitric acid should be used. The method limit of quantification for each element is dependent on the sample matrix as well as the instrument. For cadmium a limit of quantification of 0,05 mg/kg should normally be obtained while for lead, a limit of quantification of 0,5 mg/kg should be obtained.