Cena s DPH / bez DPH
Hlavní stránka>BS EN 62047-13:2012 Semiconductor devices. Micro-electromechanical devices Bend-and shear-type test methods of measuring adhesive strength for MEMS structures
Sponsored link
sklademVydáno: 2012-05-31
BS EN 62047-13:2012 Semiconductor devices. Micro-electromechanical devices Bend-and shear-type test methods of measuring adhesive strength for MEMS structures

BS EN 62047-13:2012

Semiconductor devices. Micro-electromechanical devices Bend-and shear-type test methods of measuring adhesive strength for MEMS structures

Formát
Dostupnost
Cena a měna
Anglicky Zabezpečené PDF
K okamžitému stažení
4650 Kč
Čtěte normu po dobu 1 hodiny. Více informací v kategorii E-READING
Čtení normy
na 1 hodinu
465.00 Kč
Čtěte normu po dobu 24 hodin. Více informací v kategorii E-READING
Čtení normy
na 24 hodin
1395.00 Kč
Anglicky Tisk
Skladem
4650 Kč
Označení normy:BS EN 62047-13:2012
Počet stran:18
Vydáno:2012-05-31
ISBN:978 0 580 69450 9
Status:Standard
Popis

BS EN 62047-13:2012


This standard BS EN 62047-13:2012 Semiconductor devices. Micro-electromechanical devices is classified in these ICS categories:
  • 31.080.99 Other semiconductor devices

This part of IEC 62047 specifies the adhesive testing method between micro-sized elements and a substrate using the columnar shape of the specimens. This international standard can be applied to adhesive strength measurement of microstructures, prepared on a substrate, with width and thickness of 1 μm to 1 mm, respectively.

Micro-sized elements of MEMS devices are made up of laminated fine pattern films on a substrate, which are fabricated by deposition, plating, and/or coating with photolithography. MEMS devices include a large number of interfaces between dissimilar materials, at which delamination occasionally occurs during fabrication or in operation. Combination of the materials at the junction determines the adhesive strength; moreover, defects and residual stress in the vicinity of the interface, which are changing by processing condition, strongly affect the adhesive strength. This standard specifies the adhesive testing method for micro-sized-elements in order to optimally select materials and processing conditions for MEMS devices.

This standard does not particularly restrict test piece material, test piece size and performance of the measuring device, since the materials and size of MEMS device components range widely and testing machine for micro-sized materials has not been generalized.