Cena s DPH / bez DPH
Hlavní stránka>BS EN ISO 22515:2021 Water quality. Iron-55. Test method using liquid scintillation counting
Sponsored link
sklademVydáno: 2021-06-21
BS EN ISO 22515:2021 Water quality. Iron-55. Test method using liquid scintillation counting

BS EN ISO 22515:2021

Water quality. Iron-55. Test method using liquid scintillation counting

Formát
Dostupnost
Cena a měna
Anglicky Zabezpečené PDF
K okamžitému stažení
6448 Kč
Čtěte normu po dobu 1 hodiny. Více informací v kategorii E-READING
Čtení normy
na 1 hodinu
644.80 Kč
Čtěte normu po dobu 24 hodin. Více informací v kategorii E-READING
Čtení normy
na 24 hodin
1934.40 Kč
Anglicky Tisk
Skladem
6448 Kč
Označení normy:BS EN ISO 22515:2021
Počet stran:30
Vydáno:2021-06-21
ISBN:978 0 580 51857 7
Status:Standard
Popis

BS EN ISO 22515:2021


This standard BS EN ISO 22515:2021 Water quality. Iron-55. Test method using liquid scintillation counting is classified in these ICS categories:
  • 13.060.60 Examination of physical properties of water
  • 17.240 Radiation measurements

This document specifies a test method for the determination of iron-55 (55Fe) activity concentration in samples of all types of water using liquid scintillation counting (LSC). Using currently available liquid scintillation counters, this test method can measure the 55Fe activity concentrations in the range from the limit of detection up to 120 mBq l-1. These values can be achieved with a counting time between 7 200 s and 10 800 s for a sample volume from 0,5 l to 1,5 l. Higher activity concentrations can be measured by either diluting the sample or using smaller sample aliquots or both.

NOTE

These performance indicators are wholly dependent on the measurement regimes in individual laboratories; in particular, the detection limits are influenced by amount of stable iron present.

The range of application depends on the amount of dissolved material in the water and on the performance characteristics of the measurement equipment (background count rate and counting efficiency).

It is the laboratory’s responsibility to ensure the suitability of this test method for the water samples tested.