BS G 237:1987
Specification for electric cables for general airframe or equipment interconnect use (200°C), extruded insulation with nickel plated conductors
| Označení normy: | BS G 237:1987 |
| Počet stran: | 20 |
| Vydáno: | 1987-09-30 |
| ISBN: | 0 580 16071 8 |
| Status: | Standard |
BS G 237:1987
This standard BS G 237:1987 Specification for electric cables for general airframe or equipment interconnect use (200°C), extruded insulation with nickel plated conductors is classified in these ICS categories:
- 49.060 Aerospace electric equipment and systems
This British Standard specifies construction and performance requirements for a range of lightweight cables with extruded insulation suitable for general airframe use in the size range 24 to 0000, and for equipment interconnect in the size range 24 to 18.
The following types of cable are specified.
| Type 01 interconnect Type 02 airframe | Single core or twisted multi-cores only |
| Type 03 interconnect Type 04 airframe | Two or more cores, with an outer jacket |
| Type 05 interconnect Type 06 airframe | Single or multi-core, with a screen and outer jacket |
The cables are suitable for continuous use where the maximum stabilized conductor temperature does not exceed 200 °C. They are suitable for applications involving flexing at temperatures down to – 65 °C.
The cables are suitable for use where the potential between conductors or between a conductor and screen, or the aircraft structure does not exceed 600 V r.m.s. and the frequency does not exceed 2 000 Hz.
Interconnect cables are suitable for use in areas with some physical protection, such as behind panels or bulkheads, and may also be used as the basis for cables having additional protection, such as a jacket or screen and jacket. They also have an application for the internal wiring of equipment.
Airframe cables are of sufficiently robust construction to be used for open aircraft wiring.
The continuous and short-term current ratings for the cables are specified in this standard.
NOTE The titles of the publications referred to in this standard are listed on the inside back cover.
Construction and performance requirements for a range of lightweight cables with extruded insulation suitable for general airframe and equipment interconnect use where the maximum stabilized conductor temperature does not exceed 200°C.