BS EN 50264-2-2:2008

This standard BS EN 50264-2-2:2008 Railway applications. Railway rolling stock power and control cables having special fire performance is classified in these ICS categories:

• 13.220.20 Fire protection
• 29.060.20 Cables
• 45.060.01 Railway rolling stock in general

EN 50264-2-2 specifies requirements for, and constructions and dimensions of, multicore cables of the following types and voltage ratings:

• 300/500 V screened or unscreened (1 mm², 1,5 mm² and 2,5 mm², number of cores from 2 to 40);

• 0,6/1 kV screened or unscreened (1,5 mm² to 50 mm², 2, 3 and 4 cores).

NOTE Not all conductor sizes or number of cores are specified for every type.

All cables have class 5 tinned copper conductors to EN 60228, halogen-free insulation and halogen-free sheath. They are for use in railway rolling stock as fixed wiring, or wiring where limited flexing in operation is encountered. The requirements provide for a continuous conductor temperature not exceeding 90 °C and a maximum temperature for short circuit conditions of 200 °C based on a duration of 5 s.

Under fire conditions the cables exhibit special performance characteristics in respect of maximum permissible flame propagation (flame spread) and maximum permissible emission of smoke and toxic gases.

EN 50264-2-2 should be read in conjunction with Part 1 “General requirements”.