Vážení zákazníci, v letošním roce budeme expedovat poslední objednávky ve středu 18. 12. 2024.

Těšíme se s vámi na shledanou od pondělí 06. 01. 2025.

 

Cena s DPH / bez DPH
Hlavní stránka>PD ISO/TS 28581:2012 Water quality. Determination of selected non-polar substances. Method using gas chromatography with mass spectrometric detection (GC-MS)
Sponsored link
sklademVydáno: 2012-03-31
PD ISO/TS 28581:2012 Water quality. Determination of selected non-polar substances. Method using gas chromatography with mass spectrometric detection (GC-MS)

PD ISO/TS 28581:2012

Water quality. Determination of selected non-polar substances. Method using gas chromatography with mass spectrometric detection (GC-MS)

Formát
Dostupnost
Cena a měna
Anglicky Zabezpečené PDF
K okamžitému stažení
7998 Kč
Čtěte normu po dobu 1 hodiny. Více informací v kategorii E-READING
Čtení normy
na 1 hodinu
799.80 Kč
Čtěte normu po dobu 24 hodin. Více informací v kategorii E-READING
Čtení normy
na 24 hodin
2399.40 Kč
Anglicky Tisk
Skladem
7998 Kč
Označení normy:PD ISO/TS 28581:2012
Počet stran:36
Vydáno:2012-03-31
ISBN:978 0 580 66221 8
Status:Standard
Popis

PD ISO/TS 28581:2012


This standard PD ISO/TS 28581:2012 Water quality. Determination of selected non-polar substances. Method using gas chromatography with mass spectrometric detection (GC-MS) is classified in these ICS categories:
  • 13.060.50 Examination of water for chemical substances

This Technical Specification specifies a method for the determination by gas chromatography with mass spectrometric detection (GC-MS) of polycyclic hydrocarbons and pesticide residues in drinking water and ground water at mass concentrations above 0,005 µg/l and surface water and waste water at mass concentrations above 0,01 µg/l (for each single compound).

This method can apply to non-polar substances other than polycylic aromatic hydrocarbons (PAH) and pesticide residues. However, it is necessary to verify the applicability of this method for these compounds.

NOTE 1 A potentially suitable method for this verification is specified in ISO/TS 13530.[3]

This Technical Specification can be used for samples containing up to 150 mg/l of suspended matter.

NOTE 2 Determination of PAH using GC-MS lies within the scope of ISO 28540.[9]